Wear strips

Wear strips St 1000 green / white / black:

Wefapress wear strips are available in the widths 15, 20, 25, 30, 35, 40, 45, 50 and 55 mm. Other widths and thicknesses are available on request.

Thickness 2 mm = approx. 80 m
Thickness 3 mm = approx. 54 m
Thickness 4 mm = approx. 40 m
Thickness 5 mm = approx. 32 m
Thickness 6 mm = approx. 27 m

Self-adhesive wear strips St1000 AC natural / black

Developed for easier assembly:
Wefapress® St1000 AC self-adhesive wear strips are resistant to all common acids and aggressive media. The surface to be glued must be free of dust and grease in order to ensure good adhesion. Wear strips that have been glued can be removed again for renewed gluing under certain circumstances. The optimal adhesion force is achieved immediately. Up to a certain thickness, the wear strips can also be glued around 90° corners.

Self-adhesive wear strips are available in the widths 25, 50, 76, 100, 127 and152 mm, each in the thicknesses 0.25 / 0.5 / 1 / 1.5 and 2 mm.
Thickness and widths are approximate values.Deviations are possible in the known tolerances.

Roll length: 15 m rolls
Material: PE-UHMW
Color: white
Release paper: white silicone paper
Density: 0.93 g/cm³
Tensile strength: 27 N/mm²
Shore hardness: 64 - 67
Ball indentation hardness: 38 N/mm²
Tear strength: 40.5 N/mm²
Ultimate elongation: 400%
Modulus of elasticity: 700 N/mm²
Friction coefficient: 0.1 ~ 0.2
Adhesive force -> shearing force: Fm max. 7.18 N/mm² at Vse 20 mm/min
Recommended processing temperature: + 10°C / + 35°C
Recommended service temperature: - 40°C / + 80°C